GSL-4®
Gasoline Fuel Treatment
A Highly Concentrated, Ashless, Non-Phosphorous,
Fuel Supplement for Gasoline that Improves Many Areas of Performance WhileReducing Emissions
Gasoline as sold in the United States and other developed countries is a
highly consistent product designed to be used shortly after leaving the
refinery. However, when left in fuel tanks, and fuel systems, problems occur
with even the best of this fuel. This often becomes a problem in both marine
and agricultural applications.
Leaded gasoline is often no longer available in many localities because
of environmental concerns and the use of catalytic converters. Many older
engines require leaded gasoline to reduce wear damage to vital engine parts.
Oxyenated gasoline is often required in urban areas. This also creates combustion
problems that can diminish engine performance.
GSL-4 contains compounds and ingredients that improve the performance
aspects of the gasoline as it is available today.
GSL-4 contains a complete, yet gentle detergent that cleans and
dissolves milage robbing gum, varnish and carbon in the fuel lines, carburetors,
injectors and combustion chamber. It inhibits buildup of new deposits and
keeps moving parts in carburetors working freely.
GSL-4 includes a surfactant that breaks down the surface tension
of water. This chemical emulsifier breaks water into microscopic particles
and disperses them into the fuel to be burned during the combustion cycle.
It removes water from fuel tanks, gas lines and bulk storage tanks. Gasoline/Petro
freeze-up is eliminated when the system is rid of water. Rust and corrosion
of fuel tanks, and fuel system components is greatly reduced.
GSL-4 contains a compound designed to reduce wear damage to vital
engine parts caused by unleaded gasoline/petro. The lead replacing lubricant
accomplishes the same function as lead in regular gasoline, preventing metal
to metal contact between valves and valve seates. It helps piston rings
and valve stems to work freely, resulting in smoother operation, reduced
wear and extended engine life. The compound assures that parts in contact
with the fuel, particularly the carburetor, will work freely. GSL-4 is recommended
for increasing the life span of older agricultrual, commercial and marine
engines that required leaded fuel.
GSL-4 includes a combustion modifier that provides a smoother
power stroke of the piston. It contributes to more complete combustion so
the engine will harness the power of the fuel more efficiently. The result
is better gasoline mileage and more power. Users report fuel savings from
8 to 10 percent. Results from your vehicle will depend on the quality of
the fuel burned and the condition of the engine.
Dosage
Add 1 ounce GSL-4 to every 16 gallons of gasoline/petro. Double dose
the first few treatments to remove exisiting water and deposits. Add to
bulk storage tanks before refilling, one gallon of GSL-4 to 2,000 gallons
of gasoline. Available in case quantities of four gallon containers as well
as 30 and 55 gallon drums.
Approvals
GSL-4 may be used in all grades of gasoline/petro. It meets Federal Regulation
46 FR 38582 per The Environmental Protection Agency. GSL-4 contains no methyl,
ethyl or isopropyl alcohol
Typical Properties
Specific Gravity at 60ºF. 0.797
Flashpoint 109ºF.
Viscosity (SUS@ 100ºF) 30.0 SEC
Pour Point Below -60ºF
Color Red
Initial Boiling Point 318ºF.
Final Boiling Point 418ºF.
Ash Content Less than 0.005%
Handling
Safe to handle. Store the product in a cool, dry place, away from heat,
sparks or flames. Do not reuse containers.
Advanced Technology International Corp.
1820 Wallace Ave. Suite 108,
St. Charles IL 60174, USA.
Tel: (630)513-0009 ; Fax: (630) 513-0080
[BACK TO FUEL
ADDITIVES]
[E-MAIL ATI]