SLIC-TITE® PASTE WITH PTFE*
Heavy Duty Thread Sealing Compound
- Contains more PTFE* particles for greater sealing power.
- Non-toxic, non-drying.
- Washes off hands and clothing easily.
- Also available in convenient stick.
- Use on metal, PVC, CPVC, and ABS plastic pipe threads.
- For sealing water, air, steam, natural gas, LP gas, refrigerants,
ammonia, gasoline, and oil.
- Sealing temperature range: -46°C to 260°C (-50°F to
500°F).
- Working pressures: 204 BAR (3,000 PSI) for gas, 680 BAR (10,000
PSI) for liquid.
- USDA approved for use in federally inspected meat and poultry plants.
DIRECTIONS:
Stir before using. Brush Slic-tite into valleys of pipe threads. Keep container
covered when not in use. DO NOT USE ON OXYGEN, CHLORINE OR OTHER OXIDIZERS,
use PTFE Tape or Oxytite Paste.
*DuPont Registered Trademark
Heat Seal Stik / Bloc-It / Sure Chek / Alum. Flux & Solder Kit
Regular Flux Paste / Silver
Brazing Flux / Slic-Tite Paste
T-O-T Paste / Pan Seal Ring
/ Part # & Sizes
